Voxvalley Start free trial

25 Jun 2021 · Voxvalley Team

How to Choose a Softswitch for Your VoIP Business

To choose a softswitch, start with your business model, not the feature list. Pick a Class 4 switch if you carry wholesale minutes between carriers, a Class 5 switch if you sell calling features to end users, or a platform that does both. Then size it on calls per second, check routing, real-time billing and fraud controls, decide between hosted and own deployment, and test it with your own traffic before you sign.

The softswitch is the system every call on your network passes through, so changing it later is slow and costly. This guide is a buyer's checklist. If you need the basics first, read what a softswitch is and how it works.

Step 1: Match the switch to your business model

The first question decides most of the others: who are your customers?

  • Wholesale carrier or termination business. You buy and sell minutes in bulk. You need a Class 4 switch built for high call volumes, many interconnects, rate decks and least-cost routing.
  • Retail VoIP or business phone provider. You serve end users and companies. You need Class 5 features: extensions, voicemail, IVR, call recording, hosted PBX, and apps your users dial from.
  • Reseller or new operator. You may want both, under your own brand, without building a network team. A white-label platform that bundles the switch, billing, numbers and softphone apps is often the faster route.

We compare the two classes in detail in Class 4 vs Class 5 softswitch.

Step 2: Size capacity on calls per second

Vendors often quote concurrent calls, but that number alone is a weak measure. Kolmisoft, a softswitch vendor, points out that capacity depends heavily on how the switch handles each call. Passing only the signalling is the lightest load, proxying the media is heavier, and proxying media while transcoding between codecs is heaviest. It recommends calls per second (CPS) as the more useful metric, with concurrent calls following from it.

Traffic mix matters too. Short calls and low answer rates mean more call attempts for the same minutes, and wholesale traffic needs far more CPS than a business phone service. Ask every vendor for figures on comparable hardware and a traffic profile like yours, and plan for at least double your expected peak.

Step 3: Check routing and failover

Routing is where a softswitch earns or loses margin. ConnexCS, another softswitch vendor, lists the common strategies: least-cost routing, quality-based routing on answer-seizure ratio (ASR), average call duration (ACD) and post-dial delay, priority, load balancing and time-based rules. Its example makes the point well. A route that costs slightly more per minute but answers more calls can be the better choice.

Make sure the switch can fail over automatically to the next route when a carrier rejects or drops a call, and that you can change routing without a developer.

Step 4: Real-time billing and records

A switch without dependable billing is a liability. Look for:

  • Real-time rating, so every call is priced as it happens.
  • Prepaid and postpaid accounts, with credit limits enforced during the call, not at month end.
  • Your own rate plans, packages and discounts.
  • Call detail records (CDRs) available in real time, with route, duration and disconnect reason for troubleshooting and disputes.
  • Invoicing, payments and reseller accounts if you plan to sell through partners.

Step 5: Fraud and security controls

Fraud can cost more in a weekend than a switch costs in a year. The Communications Fraud Control Association (CFCA) estimated global telecom fraud losses at $38.95 billion in its 2021 survey. ConnexCS recommends layered controls at the customer, destination and network level, with hard limits that block a call before cost builds up and soft limits that flag it for review. Typical threats to cover include international revenue share fraud (IRSF), Wangiri callback scams and caller ID spoofing.

At a minimum, ask for per-account spend and channel limits, destination blocking, alerts on unusual traffic, IP access lists and encrypted signalling.

Step 6: Hosted, rental or own deployment

FactorHosted or rentalOwn deployment or licence
Upfront costLow, monthly feeHigher: licence, servers, setup
Time to launchDays to weeksWeeks to months
Upgrades and uptimeRun by the vendorYour team or contracted support
Control and customisationWithin the vendor's optionsFull
Data locationVendor's data centresWhere you choose, useful where rules require local hosting
Cost at high volumeCan rise with usageUsually lower per minute

Rental suits a new operator testing a market. Own deployment suits an established provider with steady volume or data residency rules. The best case is a vendor that offers both, so you can start on rental and move without changing platforms.

Step 7: Check the vendor, not just the software

  • Track record. How long has the platform run in production, and for operators like you?
  • Support. 24x7 coverage, response times in the contract, and engineers who understand SIP.
  • Upgrade path. How are updates delivered, and do they need downtime?
  • Integrations. APIs for provisioning, CRM and your own portal.
  • Portfolio. Hosted PBX, SIP trunks, numbers, softphones and WebRTC from one vendor reduce integration work.
  • Reseller support. Can partners sell under their own brand, with their own customers and rates?

Step 8: Test before you commit

Run a trial with real traffic. Push it to your expected peak CPS, watch ASR and post-dial delay, cut a route mid-test to check failover, set a credit limit and confirm it stops calls, and reconcile a day of CDRs against your carrier's records. A vendor that will not support a proper trial is telling you something.

How Voxvalley helps

Voxvalley has been building voice platforms since 2009 for operators, VoIP providers and white-label partners. The Voxvalley softswitch handles numbers, SMS, and incoming and outgoing voice, and comes with a branded softphone and webdialer. That means a provider can launch a complete retail voice service on one platform. Every product is offered both as a white-label licence and on monthly rental, so you can start on rental and move to your own deployment as volumes grow. Traffic is carried through telecom operators.

See the white-label partner programme to run the platform under your own brand, wholesale voice, SMS and DIDs for termination routes, or the softphone range for the apps your users will dial from. Planning a new operation? Read how to start a VoIP business.

Sources

Quick answers

Frequently asked questions

Should I size a softswitch on concurrent calls or calls per second?

Use calls per second (CPS) as the main measure and treat concurrent calls as a result of it. Concurrent capacity changes with call length, answer rates and whether the switch also carries and transcodes the media, so two vendors quoting the same concurrent-call number may not be comparable.

Do I need a Class 4 or a Class 5 softswitch?

Choose Class 4 if you carry wholesale minutes between carriers, and Class 5 if you serve end users with features such as extensions, voicemail, IVR and hosted PBX. Many providers run both, or use a platform that combines them.

Is a hosted softswitch better than buying a licence?

Hosted or rental is usually faster and cheaper to start, because there is no hardware to buy and the vendor runs upgrades. A licence or own deployment gives more control and can cost less at high volume, and some regulated markets require local hosting. Many operators start on rental and move later.

Talk to sales

Ready to carry traffic?

Tell us your use case, countries and monthly volume. We reply within one business day with pricing and a working demo.

WhatsApp us