Voxvalley Start free trial

23 Jan 2021 · Voxvalley Team

How to Set Up VoIP for Your Business in 7 Steps

To set up VoIP for your business, first check that your internet connection can carry the number of calls you make at once. Then choose a service model: a hosted PBX, or SIP trunking into a phone system you already have. After that, get new phone numbers or port your existing ones, pick softphones or IP desk phones, set up call flows such as IVR menus and ring groups, and test call quality before you switch over. A small office can usually go live within days, because a hosted service needs no hardware on site beyond the devices.

This guide is for businesses that want to use VoIP for their own calls. If you want to sell VoIP services to others, see our guide on how to start a VoIP business.

How business VoIP works

VoIP (voice over internet protocol) turns a call into data packets and sends them over your internet connection instead of a copper phone line. A provider connects those calls to the public phone network, so you can still call any mobile or landline number, and customers can still reach you on a normal phone number. Calls are signalled with SIP (Session Initiation Protocol), and the audio is compressed with a codec such as G.711 or G.729.

Step 1: Check your network

Voice needs little bandwidth, but it needs it to be steady. Cisco calculates that one G.711 call over Ethernet uses about 87.2 kbps in each direction, and one G.729 call about 31.2 kbps. Multiply by the most calls you expect at the same time, then add headroom for everything else on the line. Delay matters as much as speed. The ITU-T G.114 recommendation treats one-way delay of up to about 150 ms as acceptable for most calls. Keep jitter and packet loss low, and if your router supports it, give voice traffic priority (QoS).

Step 2: Choose your service model

ModelWhat it isBest for
Hosted PBX / cloud phone systemThe provider runs the phone system; you get users, extensions and features through a web portalSmall and mid-sized teams, remote and hybrid staff
SIP trunkingConnects an existing on-site or virtual PBX to the phone network over the internetBusinesses that already own a PBX or contact-centre software
Voice APIProgrammable calling built into your own app, CRM or websiteProduct teams adding click-to-call, IVR or call tracking to their software

Many businesses mix models, for example a hosted system for staff and a Voice API for calls placed from their app. If you are weighing VoIP as part of a wider move to chat, meetings and calling in one place, our unified communications guide covers that decision.

Step 3: Get or port your numbers

You can keep the numbers customers already know by porting them to your new provider. Porting needs a recent bill and an authorisation letter, and timelines vary by country and operator, so start early and keep the old service active until the port completes. You can also add new numbers: local numbers for cities where you want a presence, toll-free numbers for support lines, and mobile numbers where local rules allow. Our explainer on what a virtual phone number is covers the options. Check the local rules too. Some countries ask for proof of address or business registration before a number is issued, and India has its own rules on internet telephony.

Step 4: Pick devices

  • Softphones on laptops and mobiles cost nothing extra in hardware and let staff take business calls anywhere. See softphone benefits for business.
  • IP desk phones suit receptions and front desks that need a physical handset.
  • Headsets with noise cancelling matter more for call quality than most people expect.
  • Browser calling (WebRTC) lets agents call from a web page with nothing to install.

Step 5: Configure call flows

Map how calls should move before you build anything. Decide on business hours, an IVR menu ("press 1 for sales"), ring groups or queues for each team, voicemail-to-email, and what happens after hours. Keep the IVR short: two levels at most. Add call recording only where you need it, and tell callers when calls are recorded, as many countries require.

Step 6: Secure the system

  • Use strong, unique SIP passwords and turn on two-factor login for the admin portal.
  • Block international destinations you never call, and set spending limits to contain toll fraud.
  • Use encrypted signalling and media (TLS and SRTP) where your provider supports them.
  • Keep phone firmware and apps up to date.

Step 7: Test, then switch over

Run a pilot with one team for a week. Place calls to mobiles, landlines and abroad, at busy times as well as quiet ones, and listen for echo, one-way audio and dropped calls. Check that the IVR routes correctly and that emergency calling works the way local rules require. Then move the rest of the business in stages, and switch the ported numbers last.

What it costs

Business VoIP costs usually come in three parts: a monthly fee per user or per channel, a monthly rental for each phone number, and per-minute charges for outbound calls (and for inbound calls on toll-free numbers). Calls between your own extensions are usually free. Add one-off costs for desk phones and headsets if you need them. When you compare providers, price your real call mix, by destination and by number type, rather than the headline per-user price.

Common set-up mistakes

  • Sizing bandwidth for average use rather than the busiest hour.
  • Cancelling the old phone line before the number port completes.
  • Building a long IVR that hides the option customers actually want.
  • Leaving international calling open on every extension.
  • Skipping Wi-Fi checks, because weak Wi-Fi is a common cause of choppy calls.

How Voxvalley helps

Voxvalley Voice & Numbers gives you local, mobile and toll-free numbers in 180 countries, managed from one console where you can provision, port and manage them. The Voice API handles inbound and outbound calling, IVR, recording and click-to-call on carrier-grade routes with automatic failover, and US calls go through operators that run STIR/SHAKEN. Staff can use the numbers from a softphone or a browser webdialer on day one, with no hardware. Voice & Numbers is also available on monthly rental and as a white-label platform for partners. For a bigger team setup, see our unified communications platform.

Sources

Quick answers

Frequently asked questions

How much internet speed do I need for business VoIP?

Plan for about 87 kbps per call in each direction with the G.711 codec, or about 31 kbps with G.729, multiplied by the most calls you make at the same time. Add headroom for other traffic. A steady connection with low delay and packet loss matters more than raw speed.

Can I keep my existing business phone number with VoIP?

Usually, yes. You can port your number to the new provider with a recent bill and an authorisation letter. Keep the old service active until the port is complete, because timelines vary by country and operator.

Is a hosted PBX or SIP trunking better?

A hosted PBX suits most small and mid-sized businesses, because the provider runs the system and you manage it from a web portal. SIP trunking suits businesses that already own a PBX or contact-centre software and only need a connection to the phone network.

Talk to sales

Ready to carry traffic?

Tell us your use case, countries and monthly volume. We reply within one business day with pricing and a working demo.

WhatsApp us